Skim Coating for Smooth Walls & Ceilings in Sunnyvale & the Bay Area
Texture removal and skim coating for walls and ceilings, as a standalone project or as part of a kitchen or bathroom remodel. Primer is included, so the surfaces are handed over ready for paint. The owner is on site, and the written price holds when the scope matches.
Free on-site consultation · Site visit usually within 1-2 days
Smooth Walls and Ceilings in Oakland
Living room walls and ceiling
Smooth walls and a smooth ceiling in a living room with large windows, where daylight shows every seam, patch, and wave in the surface.
Request a Consultation
Smooth Walls and Ceilings
You don't have to remodel a room to make it look newer and more refined. Often smooth walls and ceilings are enough. A smooth surface changes how light falls and how paint, furniture, and the whole room look. Large windows and strong daylight reveal old texture, patches, and traces of past repairs that are almost invisible in the evening.
Texture Removal
Orange peel, knockdown, and other old texture can make a house look dated, even when everything else has been updated. We prepare these walls and ceilings for a smooth finish. Removing the texture completely is not always necessary: if the existing surface is sound, it can be prepared and leveled over. We decide after inspecting the surface.
- Walls and ceilings with orange peel, knockdown, and other texture
- Leveling old transitions and patches
- Wallpaper removal and wall preparation
- Preparation for paint or a decorative finish
Skim Coating of Walls and Ceilings
Skim coating levels the entire wall or ceiling with thin coats of joint compound, followed by sanding and primer. The result is a flat, consistent surface with no visible old texture, transitions, or patches, including in side light from a window. The room stays the same, but it looks cleaner and more finished.
- Skim coating of walls and ceilings, together or separately
- Leveling waves, seams, transitions, and old patches
- Preparation for dark paint and semi-gloss, which show everything
- Smooth walls as part of a kitchen or bathroom remodel
What Skim Coating Includes
We isolate and protect the work area before any sanding starts.
Old texture, wallpaper, loose paint, and failed patches are removed or prepared, depending on what the wall needs.
Waves, seams, transitions, and old patches are leveled before the full skim coat.
Thin coats of joint compound over the entire wall or ceiling, not only over seams and repairs.
We sand with a HEPA vacuum and clean up every day. Drywall sanding is never completely dust-free, so the goal is to keep the dust contained within the work area.
Primer is included, so the walls are handed over ready for finish paint. Painting can be added as a separate line in the estimate.
Skim coating makes the most sense while a room is already open for remodeling. See our Kitchen Remodeling and Bathroom Remodeling pages. Guide: Skim coating vs. Level 5 vs. texture removal.
Other Wall Finishes
A thin, seamless mineral finish for bathroom walls, showers, and feature walls. See our microcement page.
Plaster applied by hand in layers, with depth and subtle movement of color. Matte, satin, or polished.
A lime-based finish with a soft, cloudy look for walls that should feel calm and natural.
Removal of old wallpaper, wall preparation, and installation of new wallpaper.
Applied panels, trim, and other details that give a plain wall depth and character.
Hand-painted murals and art features made for one specific wall.
Why Homeowners Choose QualiBuild
Mikhail is on site at every key stage, not just taking the order.
Hidden problems are shown and agreed on in writing, not covered with a new finish.
For the walls and for the full remodel, when the work is part of a kitchen or bathroom.
From a video with dimensions we give you a real price. If the scope matches, the agreed price holds.
Primer is included with skim coating, so the walls are handed over ready for paint.
The work area is isolated, sanding is done with a HEPA vacuum, and we clean up every day.
How a Skim Coating Project Works
Five steps, from your first photos to the final walkthrough.
Send photos or a short video of the walls along with rough dimensions. From a video with dimensions we give you a real price.
Usually within 1-2 days. We look at the surface in daylight and check the substrate, ceiling height, existing finish, and difficult areas.
You receive a clear scope of work with the main items spelled out. Materials are usually billed separately, so you control the finish level and the material budget. If the actual scope matches the video and dimensions you provided, the agreed price holds.
We isolate and protect the work area, sand with a HEPA vacuum, and clean up every day. If we uncover a hidden problem, we do not cover it with a new finish: we show it to you, send photos when helpful, and agree on the solution first. Any change to the original scope goes through a written Change Order.
We review the finished walls with you: the overall surface, corners, transitions, and the areas that are most visible in natural and side light.
Skim Coating FAQ
What is skim coating?
A thin leveling coat applied over the entire wall rather than only over seams and repairs. It is used to create smooth walls, cover existing texture, and prepare the surface for paint.
Can textured walls be made smooth without replacing the drywall?
In many cases, yes. If the existing substrate is sound, the wall can be prepared and leveled without replacing the drywall. We make that decision after inspecting the surface.
What is a Level 5 finish?
Level 5 is the highest defined level of finish for gypsum panel surfaces: a skim coat over the entire surface after the joints have been finished. For existing walls, we usually use the more practical terms full skim coat or smooth-wall finish. If your designer or architect specifically calls for Level 5, tell us before the work starts so we can price and perform the work to that specification.
Can you skim coat over a painted wall?
Yes, if the paint is sound. Gloss and semi-gloss are scuffed and primed first so the compound bonds. Loose or peeling paint is removed first.
Can I paint directly over a skim coat?
No, primer first. Fresh joint compound absorbs paint differently from the surrounding surface, and the finish will look uneven without it. Primer is included in our skim-coating scope, and we hand over the walls ready for finish paint. Painting can be added as a separate line in the estimate.
What are the downsides of smooth walls?
Smooth walls are less forgiving than textured walls: future dents and poor repairs are easier to see, especially in strong side light. That is why we skim the full surface, not just where it shows, and recommend matte or eggshell paint in rooms with large windows.
Do you skim coat ceilings too?
Yes. We skim coat walls and ceilings, together or separately. A ceiling with standard texture is leveled the same way as a wall: thin coats over the entire surface, sanding, and primer.
Do you remove popcorn ceilings?
No, we do not remove popcorn ceilings. Our work covers standard wall and ceiling textures, skim coating, smooth walls, and decorative finishes.
My house is older. What about lead paint and asbestos?
Homes built before 1978 may have lead-based paint, so work that disturbs painted surfaces is handled under the EPA lead-safe rules (RRP). Older sprayed or troweled texture may also contain asbestos and may need to be evaluated before it is disturbed. QualiBuild does not do asbestos testing or abatement. When testing or specialized asbestos work is required, qualified professionals handle it before our wall-finishing work continues. We do not simply sand or cover a suspect material and move on.
How much does skim coating cost?
It depends on the area, the condition of the walls, ceiling height, and the type of finish. We give an exact price after a site visit or from a detailed video with dimensions. If the actual scope matches the information provided, the agreed price holds.
How long does it take, and how much dust will there be?
The timeline depends on the size of the project and the condition of the existing surfaces. We give you the schedule after evaluating the work. We isolate the work area, sand with a HEPA vacuum, and clean up daily. Drywall sanding is never completely dust-free, so the goal is to keep the dust contained within the work area.
Skim Coating in Sunnyvale and Nearby Cities
We are based in Sunnyvale and smooth walls and ceilings across the Peninsula and the South Bay.
- Sunnyvale
- Mountain View
- Cupertino
- Santa Clara
- Los Altos
- Los Altos Hills
- Palo Alto
- Menlo Park
- Atherton
- East Palo Alto
- Redwood City
- Woodside
- San Carlos
- Belmont
- Foster City
- San Mateo
- Burlingame
- Hillsborough
- San Jose
- Campbell
- Saratoga
- Los Gatos
- Monte Sereno
- Milpitas
Projects in Fremont and nearby cities are considered individually.
Tell Us About Your Walls and Ceilings
Send us photos, a short video, and rough dimensions of your walls and ceilings. We will contact you within one business day and help you determine the right finish and scope. Prefer to talk? Call (408) 508-8999, daily from 9 AM to 7 PM.