Microcement · Sunnyvale & the Bay Area

Microcement in Sunnyvale & the San Francisco Bay Area

Hand-troweled microcement for bathroom walls, showers, and feature walls. One continuous surface with no grout lines, a calm mineral look, and a complete system from substrate to protective top coat. The owner is on site, and the written price holds when the scope matches.

Free on-site consultation · Written estimate in 1-2 days

Microcement bathroom walls with a backlit mirror and an oak vanity
Licensed Contractor
CSLB #1142411
General Liability Insured
We Handle Permits
5.0 on Google
★★★★★
Microcement shower walls with a built-in niche
Finished bathroom

Microcement Bathroom Walls

Walls, tub surround, and niche in one finish

Microcement on the bathroom walls, the tub and shower surround, and the niche, in a warm stone tone. No tile and no grout lines on the walls. The trowel movement stays visible, so every wall is slightly different.

The photos on this page show a bathroom finished by our finishing partner.

Google reviews of QualiBuild
What it is

What Is Microcement?

Microcement is a thin decorative coating applied by hand in several layers and sealed with a protective top coat. It gives walls one continuous, stone-like surface with no grout lines. The exact product and system are named in your written estimate.

Microcement for Bathrooms and Showers

In a shower, microcement is not just a decorative top layer. We build the complete system: a moisture-resistant backer, waterproofing, microcement, and a protective top coat, per the manufacturer's requirements and California rules for wet areas.

  • Shower and tub surround walls
  • Bathroom walls outside the wet area
  • Niches and half walls
  • Old tile removed, new backer and waterproofing

Microcement for Walls and Feature Surfaces

Outside wet areas, microcement goes over properly prepared drywall or cement board. It works where you want one calm, continuous surface instead of paint, wallpaper, or tile.

  • Accent and feature walls
  • Living room, bedroom, and hallway walls
  • Powder rooms
  • Your choice of color and texture

How Microcement Compares

Microcement or tile

Microcement has no grout lines to clean and no pattern to line up. Tile is made of separate pieces, so one damaged tile can be replaced. A microcement repair is blended by hand and may stay slightly visible.

Microcement or Venetian plaster

Venetian plaster is chosen for depth, movement of color, and polish on dry walls. Microcement looks more like stone or concrete and can be built as a system for showers. We compare real samples with you.

Microcement or limewash and paint

Limewash gives a soft, cloudy color, and paint gives an even one. Microcement is a troweled layer with visible texture and a sealed surface.

Color and texture

Smooth and even, or with more visible trowel movement. Colors are tinted to order, and you approve a sample before the main work starts.

What it needs

A sound, stable, flat substrate. Microcement is thin and follows what is underneath, so cracks and uneven areas are repaired first. We do not apply it over plywood or over existing tile.

What we handle

Old tile removal, wall preparation, waterproofing in wet areas, the finish itself, and daily cleanup. The estimate lists in writing what is included and what is not.

Materials are usually priced separately from labor, so material costs stay transparent. Microcement is one of several wall finishes we offer. For smooth walls, skim coating, and Venetian plaster, see our Smooth Walls & Ceilings page.

How it works

How a Microcement Project Works

Five steps, from your first photos to the final walkthrough.

01Tell us about the project

Send photos or a short video of the room with rough dimensions. If you know what the walls are made of, tell us.

02Site visit

Usually within 1-2 days. We check the substrate, the existing tile or paint, corners, and transitions, and take measurements.

03Sample and written estimate

You approve a sample of the color and texture. The estimate lists the surfaces, the preparation, and the finish system. If the conditions on site match, the quoted price holds.

04Preparation

In wet areas the old tile comes out, and a new backer and waterproofing go in. On dry walls we repair, level, and prime the surface. The work area is protected, and we sand with a HEPA vacuum.

05Application and walkthrough

Microcement is troweled by hand in several thin layers with drying time between them, then sealed with a protective top coat. At the end, we walk through the finished surfaces with you and explain how to care for them and when the shower can be used.

Microcement FAQ

What is microcement?

A thin decorative coating applied by hand in several layers and sealed with a protective top coat. The result is one continuous surface with no grout lines. We name the exact product and system in your written estimate.

Can I order microcement without a full bathroom remodel?

Yes. We take microcement as a standalone wall project or as part of a kitchen or bathroom remodel. The estimate lists the preparation your walls need.

Is microcement waterproof? Can it go in a shower?

Microcement by itself is not the waterproofing. In a shower, the water protection comes from the whole system: a moisture-resistant backer, a waterproofing membrane, microcement, and a protective top coat. Built that way, per the manufacturer's requirements and California rules for wet areas, microcement works in a shower.

Can microcement go over existing tile?

We do not apply microcement over existing tile. The old tile is removed and the substrate is prepared for the new waterproofing and finish system.

Will microcement crack?

Microcement is thin and bonds to what is underneath, so it follows the substrate. If the wall moves or cracks, the finish can crack too. That is why we inspect and prepare the substrate first, reinforce joints with mesh, and do not apply it over plywood. Subtle variation in tone and trowel marks are part of a hand-applied finish.

How much does microcement cost?

Microcement is skilled hand work in several layers, so treat it as a premium finish rather than a way to save money over tile. The price depends on the area, the condition of the walls, and whether it is a wet area. We give you an exact price for the work after a site visit or from a detailed video with dimensions. If the actual scope matches, the price holds.

How long does it take?

Each layer needs time to dry before the next one, so microcement cannot be rushed. A finished shower also needs curing time before it is used. We give you the schedule after the site visit.

How do I clean microcement?

Use a soft cloth or mop and a pH-neutral cleaner. Avoid abrasive pads and harsh chemicals, which can dull or stain the protective top coat. At the walkthrough, we give you the care instructions for the system installed in your home.

Can you match a color or a sample?

Colors are tinted to order, and we make a sample for your approval before the full material is ordered. A match to another brand's color can be very close, but an exact match is not guaranteed.

Do you do microcement floors and countertops?

Our main microcement work is walls, bathrooms, and showers. Floors, countertops, and furniture are considered individually, because the substrate decides whether the finish will last.

Our house was built before 1978. What about lead paint and asbestos?

Homes built before 1978 may have lead paint, and we plan demolition with that in mind. Older flooring, mastics, and wall or ceiling textures may contain asbestos and should be tested before anyone disturbs them. We do not do asbestos testing or removal. Testing is done by a certified asbestos consultant and removal by a licensed asbestos abatement contractor before our work continues.

Where we work

Microcement in Sunnyvale and Nearby Cities

We are based in Sunnyvale and work across the Peninsula and the South Bay.

  • Sunnyvale
  • Mountain View
  • Cupertino
  • Santa Clara
  • Los Altos
  • Los Altos Hills
  • Palo Alto
  • Menlo Park
  • Atherton
  • East Palo Alto
  • Redwood City
  • Woodside
  • San Carlos
  • Belmont
  • Foster City
  • San Mateo
  • Burlingame
  • Hillsborough
  • San Jose
  • Campbell
  • Saratoga
  • Los Gatos
  • Monte Sereno
  • Milpitas
Free on-site consultation

Tell Us About Your Walls

Tell us which room and which surfaces you have in mind. We will contact you within one business day, and you can send photos and rough dimensions then. Prefer to talk? Call (408) 508-8999, daily from 9 AM to 7 PM.